Uni-Vent II 1"x2"x20'

The Uni-Vent II Will conform to Virtually any metal or polycarb roofing panel. It compresses and fills every void between the ridge and roof panels. Factory applied glue strips allow the installer to roll out Uni-Vent II and apply it to the panel even in windy conditions. Any standard ridge cap will finish your installation.

• The Universal Ventilation System for all metal or polycarb panel roofs 2/12 to 20/12
• Tested Up to 110 MPH Wind Driven rain with NO measurable leakage. Apply to Ridge with Dual Strip 1/4" from edge of where Ridge Cap will be installed. Ridge cap is applied over top.
• Pure Polyurethane Foam, Vinyl Coated, UV Stabalized/Fire Retardant
• 2" Wide 1" Standard Thickness 20' Long with a double glue strip.
• The Uni-Vent II Will conform to Virtually any metal or polycarb roofing panel. It compresses and fills every void between the ridge and roof panels. Factory applied glue strips allow the installer to roll out Uni-Vent II and apply it to the panel even in windy conditions. Any standard ridge cap will finish your installation.